WyreStorm EXP-EX-HDBT-50 Express HDBaseT Extender, Black

ID: 12961308770376

This website is for Authorized Dealers only. Pricing and checkout is disabled unless you are authorized. "Login" or Click "Dealer Application" to apply.

WyreStorm - EXP-EX-HDBT-50 extender set

The WyreStorm Express™ EXP-EX-HDBT-50 extender set features Class B HDBaseT technology for an even more affordable HDBaseT extender solution for distribution of full, uncompressed HD and UHD video, HD multichannel audio with bidirectional IR control over shorter distances up to 25m/82ft @ 4K or 50m/164ft @ 1080p HD using a single shielded or unshielded Cat5e/6 cable.

  • HDBaseT Class B extenders capable of the following transmissions over single Cat5e/6
- UHD 4K 3840x2160p (UHD), 4096x2160p (DCI)@30Hz with chroma subsampling 4:2:0 up to 25m/82ft - 1920x1080p (HD) @60Hz up to 50m/164ft
  • HD multichannel audio - Dolby TrueHD, DTS Master HD Multi-channel 7.1 / 5.1 Stereo audio (PCM only)
  • Transmits discrete wide-band two-way IR control signal together within the HDMI signal
  • Fully 3D support (up to 1080) - frame packing/sequential (Blu-ray) and Interlaced stereoscopic (satellite/cable broadcasts)
  • Supports 24bit (4K) | 36bit Deep Color (1080p)
  • HDMI 1.4
  • Cable termination follows IEEE-568B standards
  • Automatically adjusts feedback, equalization and amplification of signal for easy installation.
  • EDID management on transmitter and DIP Setting on receiver tfor improved communication and compatibility between devices
  • LED indication for visual power and HDMI / HDBaseT video signal status.
  • Fully cascadable to further lengthen transmission and increase your distribution capabilities.

NOTE: HDMI cable length between devices should not exceed 10m/33ft. HD LED/plasma displays can also be substituted for any other HDMI display device, such as a digital projector or further extended using another WyreStorm extender set featuring alternative transmission such as fiber or UTP/HDBaseT.

The EXP-EX-HDBT-50 may also be integrated into a larger HDBaseT matrix distribution using HDMI input connectivity.

  • 1 x WyreStorm EXP-EX-HDBT-50 Transmitter 
  • 1 x WyreStorm EXP-EX-HDBT-50 Receiver 
  • 1 x Quickstart guide (Quickstart and full manual also downloadable from product page)
  • 2 x Pairs of mounting brackets 
  • 2 x IR emitter for IR control of source device from display zone 
  • 2 x IR receiver to receive IR control signals at display (IR frequency range: 940nm IR Frequency: 38-56KHz) 

Dimensions (WxHxD): 120mm × 24mm x 101mm /4.72'' x 0.94 x 3.97''

Weight (Kg): 0.36Kg / 0.79lb (each)

Operating Temperature Range: 5 to 90 % RH (no condensation)

Operating Humidity Range: -5 to +35°C (-41 to +95°F)

Video Amplifier Bandwidth: 6.75Gbps

Input Video Signal: 0.5-1.0 volts p-p

Input DDC Signal: 5 volts p-p (TTL)

Maximum Single Link Range: 4096x2160p 24bit Color, 1920x1200p 36bit

Color Transmission distance: 25m/82ft (max.) @ 4K | 50m/164ft (max.) @ 1920x1200p

Video Format Supported:

VESA: 640x480, 800x600, 1024x768, 1280x1024, 1600x1200, 1920x1080,
1920x1200, 3840/4096x2160p@30Hz 4:2:0
DTV/HDTV: 480i/576i/480p/576p/720p/1080i/1080p/4Kx2K

Output Video: HDMI 1.4

Audio Format Supported: Dolby TrueHD, DTS Master HD Multi-channel 7.1 / 5.1 Stereo audio (PCM only)

Power Supply: 5V DC - from mains

Power Consumption: 5 Watts (max.)

BTU Rating (British Thermal Unit): 25.59

You recently viewed

Clear recently viewed