Wyrestorms SW-515-RX 3-input 4K UHD Switching HDBaseT Receiver with USB Host/Device Ports & Dual Ethernet

SKU WSSW-515-RX
This website is for Authorized Dealers only. Pricing and checkout is disabled unless you are authorized. "Login" or Click "Dealer Application" to apply.

SW-515-RX 3-input 4K UHD Switching HDBaseT Receiver with USB Host/Device Ports & Dual Ethernet

Powerful, next generation HDBaseT receiver compatible with WyreStorm's presentation switcher platform, perfect for corporate meeting and classroom environments.

Automatically switches between a remote source sent over HDBaseT and 2 local HDMI sources, all with USB device extension. CEC triggering and 3rd party device relays further contribute to a superior and autonomous presentation experience.

4-INPUT SWITCHING EXTENDER

A new flagship in our PRO range and a first for our switching extenders, the EX-SW-0401-H2-PRO brings features of the H2 and PRO products into one powerful meeting space solution. Supporting USB routing to both HDMI and DP inputs, this extender accepts HDMI, DisplayPort and USB3.1c sources with a VGA +audio input for legacy devices. Proudly carrying the H2 moniker, it will support 4K content and even HDCP2.2 protected content.

ADDITIONAL RECEIVER INPUTS

When the meeting room is in an idle state, the receiver can switch to either of its HDMI inputs which can be used for anything from a signage player to a satellite receiver, keeping the screen active and displaying content. These inputs can also be triggered manually at any time should a Chromecast or AppleTV be fitted for screen mirroring.

TWO CONDITION-BASED RELAYS BUILT INTO RECEIVER

With autonomy in mind, this “meeting-room-in-a-box” can be configured to automatically trigger motorized devices within the room. The relays will open or close depending on the status of the transmitter, meaning that upon a source connection being made, the meeting room will come to life with projector screens appearing and window blinds closing.

USB 2.0 PASS-THROUGH

HDBaseT2.0 affords the addition of USB 2.0 pass-through, offering not only KVM functionality for extension of a keyboard/mouse or touchscreen but also full data transfer capabilities. Furthermore, allowing 2 host devices to be connected, the extender can route USB traffic depending on the currently selected source at the receiver.

  • HDBaseT receiver with switching inputs for education or corporate meeting rooms
  • Automatic or manual switching between a remote HDBaseT source or 2 local HDMI's
  • Bidirectional USB2.0 for connection of webcams, smart touchscreens and microphones
  • Automatic or manual CEC triggering for compatible connected screens or projectors
  • Condition based relays triggered on source presence
  • Supports source content up to 4K/60 4:2:0 with HDCP 2.2
Inputs 2x HDMI In: 19-pin type A
1x HDBT In: 8-pin RJ-45 Female
Outputs 1x HDMI Out: 19-pin type A
1x Audio Out: 3-pin Pheonix
1x Line Out: 3.5mm (1/8in) TRS Stereo
Output Video Encoding HDBaseT™ Class C
Encoding Data Rate 9.2Gbps
End to End Latency 10μs (micro seconds)
Audio Formats 2ch Analog/PCM | Multichannel: LPCM
Video Resolutions (Max) Video Resolutions
1920x1080p @60Hz 8bit
1920x1200p @60Hz 8bit
3840x2160p @30Hz 8bit 4:4:4
4096x2160p @60Hz 8bit 4:2:0
HDMI HDMI | HDCP 2.2 | EDID | DVI/D supported with adapter (not included)
HDBaseT™ HDMI | HDCP 2.2 | EDID | CEC | 2ch audio | USB
RS-232 1x RS-232 (Control): 3-pin Phoenix | 1x RS-232 (Passthrough): 3-pin Phoenix
Ethernet 2x 8-pin RJ-45 female | Web UI | IP Control | Bidirectional over HDBaseT™
IR 1x IR TX: 3.5mm (1/8in) TS Mono
Relays 1x Screen UP: 3-pin Phoenix | 1x Screen DWN: 3-pin Phoenix
USB 2x USB Host: USB-B | 3x USB Device: USB-A

You recently viewed

Clear recently viewed