Infrared

Premium IR Repeater System (1)6 Port Distribution Block, (1)12VDC Power Supply, (1) Rectangular "Dinky Link" IR Receiver with Bare leads, (2) Dual...

Single IR Infrared Emitter Extension Cord 3.5mm Plug Remote Control Extender 3M Single IR Emitter Extension Cable compatible with devices in 38khz...

Xantech DL85K LCD/CFL Proof Dinky Link IR Receiver Kit The DL85K has a surface-mount design and a standard range (up to 80 feet). It works with LED...

Dual IR Infrared Emitter Extension Cord 3.5mm Plug Remote Control Extender 3M Non visible (blinks only infrared light) high output version. For us...

28DES - Designer Emitter Shield Cover The 28DES is a black (IR opaque) 1” x 2” shield that fits over both the Xantech Designer Emitter body and the...

IR Receiver whit 35mm plug IR Receiver is dual band 30 KHz to 60 KHz IR Receiver range up to 30 feet on axis, pending remote strength and ambien...

283D - Visible Designer Emitter The 283D Blink-IR Designer Emitter contains a small Infrared LED housed in a miniature, designer styled, black appe...

283D - Visible Designer Emitter The 283D Blink-IR Designer Emitter contains a small Infrared LED housed in a miniature, designer styled, black appe...

Xantech 286D Designer Dual Blink Emitter  Simply insert the mono mini plug of the 286D emitter into the "EMITTERS" or "OUT" jacks on any of the Xa...

DL85 - Dinky Link Plasma/LCD/LED/CFL Proof IR Receiver These small IR receivers have been designed for mounting in very small spaces. They may be m...

MSU140- IR Repeater Main System Unit for Single Zone; One Input, Four Flasher Out Niles Audio MSU140 | FG01002 IR Repeater System for Single Zone A...

  Xantech 284D Designer Dual Emitter Two emitters in series with each other and terminated in a single 3.5mm mono mini plug Length of wire: 7 feet...

HL85BK - Hidden Link™ Shelf Top Plasma/LCD/LED/CFL Friendly IR Receiver The Hidden Link IR Receiver is a small shelf-top infrared repeater assembly...

28VHB - High Performance Emitter Tape All Adhesives Were Not Created Equal - Use This to Reapply IR Emitters and Sensors. For use on cured or rough...

280731 - One Zone Six Source IR Kit Vanco Transmission of IR Signals from up to 6 IR Emitters to one IR Receiver Features Allows for the Transmiss...

Designer Emitter With Twin Plug 282D high-output Designer Emitter with two 3.5mm plugs Allows control of single source by two IR systems Diode iso...

282D - Standard High Output Designer Emitter The 282D Designer Emitter contains a tiny infrared LED housed in a miniature, designer styled, black a...

Xantech 286D Designer Dual Blink Emitter  Simply insert the mono mini plug of the 286D emitter into the "EMITTERS" or "OUT" jacks on any of the Xa...

284D - Designer Dual Emitter The 284D Designer Emitter each contain a tiny infrared LED housed in a miniature, designer styled, black appearing, in...

286D - Designer Dual Blink Emitter The 286D Dual Blink-IR Designer Emitter contain small infrared LEDs housed in a miniature, diamond shaped plasti...

282D - Standard High Output Designer Emitter The 282D Designer Emitter contains a tiny infrared LED housed in a miniature, designer styled, black a...

DL95 - Universal Dinky Link IR Receiver These small IR receivers have been designed for mounting in very small spaces. They may be mounted under sh...

CB12 - 1-Zone Connecting Block The Model CB12 provides a low cost means of connecting Xantech "Quick Connect" IR Receivers and standard 3-wire IR R...

Russound 846C 12V/300mA Power Supply The 846C is Russound’s versatile 12-volt, 300 mA power supply for SaphIR® infrared products and other applicat...