Ubiquiti PBE-M5-300 PowerBeam M5, White

SKU UBPBEM5300
ID: 13028917313608




This website is for Authorized Dealers only. Pricing and checkout is disabled unless you are authorized. "Login" or Click "Dealer Application" to apply.

PBE-M5-300 PowerBeam M5 Integrated InnerFeed 5 GHz airMAX Bridge

Install the 5-Pack of PBE-M5-300 PowerBeam M5 Integrated InnerFeed 5 GHz airMAX Bridges from Ubiquiti Networks into a variety of network configurations including point-to-multipoint, wireless client, or point-to-point and take advantage of enhanced beamwidth technology. The built-in airMAX technology utilizes the Time Division Multiple Access (TDMA) signal which breaks down the signal into specified time slots to reduce collisions. As a result, you receive reduced latency, noise immunity, and improved throughput. The PowerBeam ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference.

  • Wireless Transmission Speed:54 Mbps
  • Form Factor:Pole-mountable
  • 5.85 GHz - 12.4 Mile Maximum Outdoor Range - 1 x Network (RJ-45) - PoE - Pole-mountable
  • PowerBeam PBE-M5-300 IEEE 802.11n 54 Mbps Wireless Access Point
  • High-Performance airMAX Bridge

Improved Noise Immunity

  • The PowerBeam ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. With its combination of focused beam directivity, RF isolation, and QoS, the PowerBeam ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency.

Integrated Radio Design

  • Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Providing high performance and innovative mechanical design at a low cost, the PowerBeam ISO is versatile and cost-effective to deploy even at long distances.

airMAX Technology Included

  • Unlike standard Wi-Fi protocol, Ubiquiti's Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller. This time slot method eliminates hidden node collisions and maximizes airtime efficiency, so airMAX technology provides performance improvements in latency, noise immunity, scalability, and throughput compared to other outdoor systems in its class

airOS

  • airOS is a versatile, highly developed Ubiquiti firmware technology. It is intuitive and was designed to require no training to operate. Behind the user interface is a powerful firmware architecture, which enables high performance, outdoor multi-point networking.
  • Protocol Support
  • Ubiquiti Channelization
  • Spectral Width Adjustment
  • ACK Auto-Timing
  • AAP Technology
  • Multi-Language Support

airView

  • Integrated on all Ubiquiti M products, airView provides advanced spectrum analyzer functionality: waterfall, waveform, and real-time spectral views allow operators to identify noise signatures and plan their networks to minimize noise interference.
  • Waterfall Aggregate energy over time for each frequency.
  • Waveform Aggregate energy collected.
  • Real-time Energy is shown in real time as a function of frequency.
  • Recording Automate airView to record and report results.

airControl

  • airControl is a powerful and intuitive web-based server network management application, which allows operators to centrally manage entire networks of Ubiquiti devices.
  • Network Map
  • Monitor Device Status
  • Mass Firmware Upgrade
  • Web UI Access 
  • Manage Groups of Devices
  • Task Scheduling

Hardware Overview

  • Innovative Mechanical Design
  • Metal-plated interior of rear housing enhances RF shielding. 
  • Built-in mechanical tilt mounting bracket offers ±20° of tilt.
  • Convenient pole mounting with a single wrench to mount the PowerBeam ISO on a pole.
  • Industrial-Strength Construction
  • GEOMET-coated fasteners for improved corrosion resistance when compared with zinc-plated fasteners. 
  • Dish and brackets made of galvanized steel that are powder‑coated for enhanced corrosion resistance.
  • Protective radome shields protect the radio from nature's harsh elements.
  • RF Isolation The integrated isolator design spatially filters ut interference, so the PowerBeam ISO delivers improved noise immunity in co-location deployments.
Processor Atheros MIPS 74Kc, 560 MHz
Memory 64 MB DDR2, 8 MB flash
Networking Interface 1 x 10/100 Ethernet port
Wireless Approvals FCC, IC, CE
RoHS Compliance Yes
Power Supply 24 V, 0.5 A PoE
Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return)
Voltage Range 20-26 VDC
Power Consumption 6 W (max.)
Gain 22 dBi
Operating Frequency Worldwide: 5170 - 5875 MHz USA: 5725 - 5850 MHz
Wind Loading 145.2 N @ 120 km/h (33 lbf @ 75 mph)
Wind Survivability 120 km/h (75 mph)
LEDs 1 x Power 1 x LAN 4 x WLAN
Signal Strength LEDs Software-Adjustable to Correspond to Custom RSSI Levels
Channel Sizes 5/8/10/20/30/40 MHz
Polarization Dual Linear
Enclosure Outdoor UV stabilized plastic
Mounting Pole-mounted kit included
ESD/EMP Protection Air: ± 24 kV Contact: ± 24 kV
Temperature & Humidity Operating Temperature: -40 to 158°F / -40 to 70°C Operating Humidity: 5 to 95% non-condensing
Salt Fog Test IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5
Vibration Test IEC 68-2-6
Temperature Shock Test IEC 68-2-14
UV Test IEC 68-2-5 at 104° F (40° C), Equivalent: ETS 300 019-1-4
Wind-Driven Rain Test ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5
Output Power 26 dBm
Max VSWR 1.5:1
Built-In Mechanical Downtilt ±20°
Dimensions 12.80 x 12.80 x 10.08" (325 x 325 x 256 mm)
Weight 2.65 lb (1.203 kg)
Box Dimensions (LxWxH) 17.5 x 15.5 x 9.2"

You recently viewed

Clear recently viewed