TechLogix TL-MC-1S1R, 10/100/1000M Ethernet SFP Media Converter with 1 GE SFP Slot & 1 RJ45 Port
by TechLogix
SKU TXTL-MC-1S1R
Fiber-based Media Converter -- 1 SFP & 1 RJ45
- Convert signals from twisted pair to fiber and vice versa
- One SFP (fiber) port and one RJ45 (twisted pair) port
- 10/100/1000M data rate
- 850nm/1310nm/1550nm supported wavelengths
- Single mode and multimode fiber compatible (SFP module dependent)
- SFP module sold separately
- Multimode max distance: 550m (1,805 ft.)
- Single mode max distance: 20km (12.4 miles)
- 0 degree to 60 degree C operating temperature
- 1.0" x 2.75" x 3.6" (26mm x 70mm x 93mm)
- 5V power supply (included)
- IEEE 802.3z & 802.3ab compliant
- MDI/MDIX auto-crossover
- Jumbo frame (64-9216 byte)
- Voltage monitor support
- Diagnostic LEDs
- Plug-and-play compliant
TechLogix media converters adapt fiber signals to a variety of different formats and/or cable types.
The TL-MC-1S1R features one SFP port (SFP module sold separately) and one RJ45 twisted pair port, effectively adapting twisted pair-based devices to fiber for longer transmission distances. The MC-1S1R supports multimode fiber when paired with a multimode SFP module and single mode fiber when paired with a single mode SFP module
Two TL-MC-1S1R media converters are required for most applications -- one for each end of the cable run.
| LED | Status | Operational Status |
| 1000M | On Off |
1G Link established 1G Link NOT established |
| 100M | On Off |
10/100M Link Established 10/100M Link NOT established |
| SFP Link/ACT | Blinking Off |
Data is transferring through the SFP Module Data id NOT transferring through the SFP Module |
| UTP Link/Act | Blinking Off |
Data is transferring through the UTP cable Data id NOT transferring through the UTP cable |
| FDX | On Off |
Fiber connection is Normal Fiber connection FAULT |
| PWR | On Off |
Power supply is connected No power supply is connected |
