Simplified ARCEX, ARC only Audio Extender with CEC
The ARCEX is a 90m digital audio extender that extends ARC up to 90m/295ft. to ARC capable audio devices. The units are powered via supplied USB power supplies. Power can be attained from display as the current draw of the TX device is abour 1/3 of a Watt. RX current draw is 0.7W. CEC and all ARC formats are supported from display back to rack/AVR/ARC capable amplifier.
The ARCEX can also operate as an optical to optical extender as well (S/PDIF). There is a switch on the TX portion that will switch the unit to optical mode, this will disable ARC mode. The optical does not output on the HDMI ARC.
-
Use your smart TV as your audio source where your amplifier or other ARC enabled audio device is remote
-
Supports al ARC formats
-
90m/295ft via ARC, 150m/495ft. via optical
-
Powers via USB Micro and draws very little current so display USB ports can be used
-
USB Power Supplies are also included
-
CEC functions are retained so that TV's remote wil control the ARC enabled audio device's volume
| Distance by bit rate | ARC Mode 90m/295ft. Optical mode 150m/495ft. |
| Digital to digital audio formats | PCM, Dolby 5.1 |
| Sample rates (ARC) | 32kHz., 44.1kHz., 48kHz., 88.2kHz., 96kHz., 176.4kHz. & 192kHz. |
| Sample rates (Optical) | 32kHz., 44.1kHz., 48kHz., 88.2kHz. & 96kHz. |
| ESD Protection: Human Body Model |
+/- 8 kV (air-gap discharge) +/- 4 kV (contact discharge) |
| TX Connections | In: 1xHDMI, 1xOptical, & 1 USB Micro. Out: 1x RJ-45 |
| RX Connections | In: 1xRJ-45 & 1x USB Micro. Out: 1xHDMI & 1 Optical |
| Housing | Metal enclosure |
| Dimensions | 90mm (3.54”) [W] × 73mm (2.875”) [D] × 20mm (.79”) [H] |
| Weight | RX and TX 175g/6.175oz. |
| Power Supply | (2) 5V1A DC at each device via Micro USB port (can use available USB port) |
| Power Consumption | TX - 0.35W / RX - 0.7W |
| Operation Temperature | 32~104 °F |
| Storage Temperature | -4 ~140 °F |
| Relative Humidity | 20~90 % RH (no condensation) |
