TRENDnet TPE-P521ES 5-Port Gigabit PoE+ Powered EdgeSmart Switch with PoE Pass Through (15W)

by TRENDnet

SKU TNTPE-P521ES

1 x Gigabit PoE+ input port
2 x Gigabit PoE output ports
2 x Gigabit ports
18W PoE power budget
Easy to use web-based management interface
Supports static link aggregation, VLAN, QoS, STP, RTSP and IGMP Snooping
Voice VLAN for VoIP applications
Bandwidth control per port
10Gbps switching capacity
IEEE 802.1p QoS with queue scheduling support
Compact fanless design
Wall mountable metal housing
Lifetime Warranty*

Overview
Feature
Download Specs

	Ports Eight gigabit PoE+ ports provide a 16Gbps switching capacity
	LED Indicators The desktop PoE managed switch includes LED indicators that convey port status
Â	Troubleshooting Traffic statistics and a convenient cable diagnostic test aid in network troubleshooting.
	Housing Wall mountable metal housing
Â	PoE+ Supplies up to 30 Watts of power per port with a 246 Watt PoE budget
Â	Network Management A broad range of network configurations are supported by: static link aggregation, 802.1Q VLAN, bandwidth controls, IGMP, loopback detection, port mirroring, STP, RTSP and 802.1p (QoS).

5-Port Gigabit PoE+ Powered Edge Smart Switch with PoE Pass Through, model TPE-P521ES, is powered by a PoE+ switch or injector, no AC adapter is required.

It features two gigabit non-PoE ports, and two gigabit PoE ports to power devices such as IP cameras, VoIP handsets, and wireless access points.

Reducing unnecessary switch complexity, this Edge Smart switch is equipped with only the most commonly used managed switch features.

The simple web based user interface allows you to easily manage VLANs, QoS, and monitoring.

Specs

Standards	IEEE 802.1d IEEE 802.1w IEEE 802.1p IEEE 802.1Q IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af IEEE 802.3at IEEE 802.3az
Device Interface	1 x Gigabit PoE+ PD port 2 x Gigabit PoE PSE ports 2 x Gigabit Ports LED indicators Reset button
Data Transfer Rate	Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit Ethernet: 2000Mbps (full duplex)
Performance	Switch fabric: 10Gbps RAM buffer: 512KB MAC Address Table: 2K entries Jumbo Frames: 9KB Forwarding rate: 7.44Mpps (64-byte packet size)
Management	HTTP Web based GUI SNMP v1, v2c Cable diagnostic test Backup/Restore Configuration Upload Firmware
Spanning Tree	IEEE 802.1d STP (spanning tree protocol) IEEE 802.1w RSTP (rapid spanning tree protocol)
Link Aggregation	Static link aggregation (up to 2 groups)
Quality of Service (QoS)	Port-based QoS 802.1p Class of Service (CoS) Bandwidth Control/Rate Limiting per port (Min. Limit: 8Kbps) Queue Scheduling: Strict Priority (SP), Weighted Fair Queueing (WFQ)
VLAN	Port-based VLAN 802.1Q Tagged VLAN Up to 32 VLAN groups, ID Range 1-4094 Private VLAN Asymmetric VLAN Voice VLAN (5 user defined OUIs)
Multicast	IGMP Snooping v1/2/3 Block unknown multicast source Up to 32 multicast groups
Port Mirror	One to one Many to one
Storm Control	Broadcast (Min. Limit: 8Kbps) Multicast (Min. Limit: 8Kbps) Loopback Detection
Special Features	PoE Powered Enable/disable 802.3az Power Saving Wall mountable
Power	IEEE 802.3at (30W) or IEEE 802.3af (15.4W) PoE input only (no external power supply) IEEE 802.3at Type 2 PoE PD Class 4 IEEE 802.3af Type 1 PoE PD Class 0 Max. Consumption 2.4W (without PoE load) Max. Consumption 20.4W (with max PoE load)
PoE	18W PoE Budget with IEEE 802.3at (30W) input power 8W PoE Budget with IEEE 802.3af (15.4W) input power PoE Mode A: Pins 1,2 for power and pins 3,6 for power PD auto classification Over current/short circuit protection
Fan / Acoustics	Fanless design
MTBF	730,455 hours
Operating Temperature	0Â° â€“ 40Â° C (32Â° â€“ 104Â° F)
Operating Humidity	Max. 90% non-condensing